The eFRAME walk-in enclosure houses the KOHLER KD Series of industrial generators at 2,000 kW and up and is available in three configurations: V12 (2,000 to 2,500 kW), V16 (2,800 to 3,250 kW), and V20 (3,500 to 4,000 kW). Designed to meet or exceed 135-mph wind load ratings, it features an all-aluminum skin and frame construction and a fade/scratch/corrosion-resistant powdered coat exterior. The enclosure can be separated into three sections — one section can be independently removed in the field if a major generator set component replacement is required. This localizes the service work to avoid potential mishaps to other components while reducing service costs and downtime. Installing the enclosed generator set consists of five simple steps. First, the sub-base fuel tank is set in place followed by mounting the generator set directly to the tank and then setting the enclosure atop of it. Next is wiring the alternator load leads to the-free standing breaker and then completing customer connections, including load leads, shore power, and communication cables.